Cavity Trays | Gable Abutment System
When a stepped or staggered gable abutment is formed the status of the external skin below the roof line changes to that of an internal skin. Accordingly, every gable abutment must be constructed so as to prevent dampness and rainwater from penetrating below the abutting roof line.
The IG gable abutment cavity tray forms a stepped cavity DPC which is incorporated into the building during bricklaying. The completed structure is ready to receive roof lead flashing in the conventional way.
The IG Cavity Tray – Type GA
Manufactured from polypropylene, the IG gable abutment cavity tray is available in three sizes to suit all roof pitches up to 60°. It is suitable for use in all brick, block and timber-framed constructions, the large bridging piece catering for cavity widths from 50mm to 100mm.
Supplied flat, the pre-creased cavity trays allow for easy on-site folding to the required shape – catchment, left and right hand or ridge tray. A locating lip facilitates the accurate placement of trays during bricklaying.
Calculating Quantities
The single-element system makes the calculation of quantities very simple. Whether you are building with bricks or blocks the rule is the same: you require one cavity tray per course per slope. On a double slope roof this calculation will give you an extra tray that can be used to lengthen the ridge tray if required.
Sizes and Roof Pitches
The Keystone gable abutment cavity tray is available in three sizes. Trays are supplied in shrink-wrapped flat packs in the quantities indicated or as single items.
| Outer Leaf | Roof Pitch | Code | Size (mm) | Packs of: |
|---|---|---|---|---|
| Brickwork Blockwork |
22.5º-60º more than 45º |
GA1 | 375 x 310 | 50 or 10 |
| Brickwork Blockwork |
15º-30º 35º-45º |
GA2 | 525 x 310 | 5 |
| Brickwork Blockwork |
less than 15º 25º-40º |
GA3 | 675 x 310 | 5 |
Note: All packs contain full installation instructions and folding instructions are printed on each tray.
Internal / External Corners
Flat-packed foldable corners complete the IG gable abutment cavity tray system. Both internal (GAIC) and external (GAEC) corner trays comprise factory-jointed two-piece assemblies that are folded on site to form right-angled corners. The trays are pre-creased and incorporate adjustment for 50mm, 75mm or 100mm cavity widths and incorporate mastic sealant strips for overlapping areas.