IG Lintel Accessories

Lintel Arch Boards

Provides IG white Arch Board.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: AR

Installation
Place arch board on the outer flange of the lintel. Brickwork on top of arch board must be built on a 10mm bed of mortar.

Brick Slip Feature Lintels

Provides IG Brick Slip Feature Lintels.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: BA

Installation
Lintels to have a minimum end bearing of 150mm on each side of the opening, bedded on mortar. Level the lintel along its length and across its width. Raise the inner and outer leaves simultaneously. All joints to be filled after lintel has been built in. Lintels may be propped to facilitate speed of construction

Windposts

Provides IG Windposts.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: U1…U9/ LP1…LP12/ DU3…DU9

Installation
Windposts to be bolted to ground and intermediate floor structures. Windpost spacing determined by IG Engineer. LP Windpost to be built into blockwork. DU and U windposts to be placed in cavity.

Cavity Trays

Provides IG Bable Abutement Cavity Trays and/or Refurbishment Cavity Tray and/or Internal or External Corner Tray.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: GA1/ GA2/ GA3…/RFT

Installation
Trays to be folded as instructions on tray, to form left and right stop ends as required.

Lintel Cavity Weep Hole

Provides IG cavity weep holes with cavity wall lintels.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: WH

Installation
Insert lintel cavity weep holes at 450mm centres. At least two per opening must be installed on the outer flange of the lintel

Lintel Stop Ends

Provides IG lintel stop ends to cavity wall lintels.
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: SE

Installation
Place lintel stop ends on both ends of the outer flange of the lintel. Ensure that the stop end is positioned tightly against the front upstand of the lintel. Adjust the stop end to suit the lintel profile. Position the stop ends in a perpenicular joint nearest the end of the lintel.

Lintel Soffit Cladding

Provides PVCu IG Soffit Cladding
IG Lintels, Avondale Road,
Cwmbran, Gwent, NP44 1XY
Tel: 01633 486 486
Web: www.iglintels.com

Product Reference
IG: SCW

Installation
Attach the built in plastic clip end to the front outer flange of the lintel. The length of the Lintel soffit should be the same as the opening, not the length of the lintel.